Scania adds a 540 hp version to its 13-litre engine range
- The fifth member of Scania’s industry-leading 13-litre range
- Offers fuel savings of up to 2 percent
- Ideal for weight-sensitive applications where solid power is crucial
- Saves fuel by low internal friction, new turbo and smart auxiliaries
Scania’s range of industry leading 13-litre engines is now complemented by a 540 hp version. The new engine – DC13 166 – is primarily intended for applications and customers where lots of power and drivability are in demand while weight sensitivity or limitations such as front-axle loads hinder the use of Scania’s slightly heavier V8 engines which start at 520 hp.
“True to our promise to always tailor-make our offers, we identified a customer need for a top-of-the-line version of our 13-litre hero,” says Alexander Vlaskamp, Senior Vice President, Head of Scania Trucks. “Our inline six range is industry leading when it comes to fuel performance. Scania trucks with 13-litre engines have been crowned ‘Green Truck’ for three consecutive years in Germany, and that is a remarkable feat.”
Scania is now offering five different performance steps of its most common engine, the inline six: 370, 410, 450, 500 and 540 hp (see chart below).The new 540
“The powerful 540 is mainly intended for customers and markets where legal aspects regarding front axle loads keep them from choosing a V8,” says Vlaskamp. But it’s perfect for anyone that needs extra power in their transport operation. Paired with the relevant gearing, this engine will work equally well for a timber truck or for a ‘tulip express’. The latter travel European highways with rather light loads but are conscious about fuel consumption and average speeds.” iteration shares most of its technology with its 500 hp sibling, like a robust fixed geometry turbo unit with ball bearings instead of journal bearings.
What all DC13 engines have in common is their excellent fuel performance and the use of only SCR for exhaust after treatment. The inherent robustness along with services like Scania Maintenance with Flexible Plans contribute to favourable figures for cost and uptime, leading to outstanding total operating economy.
“The improved fuel figures and the power versus weight ratio will make this engine an attractive choice for many Scania customers,” says Vlaskamp. "Developing 2700 Nm of torque at just 1000 r/min allows everything from a vehicle specified for high speed cruising while using a low axle ratio to keep engine revs low at top speed, to excellent startability via hub reduction axles in applications such as forestry.”
Technical Data DC13 500 - 540 hp
DC13 166 540 hp
|Valves per Cylinder||4|
|Bore x Stroke||130 x 160 mm|
|Turbo Unit||Fixed geometry, ball bearings|
|Fuel Injection||Scania XPI|
|Emission Control||Scania SCR|
|Exhaust Brake||242 kW @ 2400 rpm|
|Oil Capacity||40 litres|
|Max. Output||540 hp (397 kW) @ 1800 r/min|
|Max. Torque||2700 Nm @ 1000-1300 r/min|