A complete range

Choose your cab

The Scania V8 truck range makes a bold and confident statement on the road. This top-of-the-range Scania cab can be equipped to the highest standards for operators who demand the most practical and prestigious vehicle.

R-series

S-series

R-series

S-series

R-sleeper low

A sleeper cab with lower roof that allows for transport of overhead loads

R-Sleeper Normal

A compact sleeper cab for shorter trips

R-Sleeper Highline

Gives you more space, comfort and storage for longer trips away from home

New R-day low

The lower roof allows for transport of overhead loads

R-day normal

A day cab with resting equipment for shorter trips

S-Sleeper cab normal

A compact sleeper cab for shorter trips

S-Sleeper cab highline

Brings you more space, comfort and storage for longer trips away from home

Choose your power

With the broadest range on the market, Scania offers almost endless possibilities of finding a powertrain that fits your needs perfectly.

16-litre

16-litre
Output	Torque	Fuel	Emission technology	Engine PTO
530 hp	2800 Nm	Diesel/HVO	SCR	800 Nm
590 hp	3050 Nm	Diesel/HVO/biodiesel	SCR	800 Nm
660 hp	3300 Nm	Diesel/HVO	SCR	800 Nm
770 hp	3700 Nm	Diesel/HVO	SCR	800 Nm

The New Scania

Opticruise gearbox

Scania’s new Opticruise G33CM gearbox features improved and speedy gearshifting in combination with better fuel consumption and excellent comfort. After six years of development and testing, we are introducing a gearbox with plenty of new technologies, such as variable oil volume, improved gear lubrication by oil spray function and a wider gear spread.

Thanks to significantly reduced internal losses, and thereby improved energy efficiency, the G33CM itself offers fuel savings of one percent. The weight has been reduced by 60 kg to be used for increased payload. Additionally, it provides higher uptime with an oil change interval of up to one million km. All this to ensure that your total operating economy is optimised.

DRIVEABILITY - Better driveability is achieved with a wider gear ratio spread, which includes super crawler and overdrive, that match Scania’s low rev engine philosophy.

REVERSING - Instead of a reversing gear, a planetary gear is used for reversing. This solution enables having eight gears for going in reverse at speeds up to 54 km/h. (This is useful when, for instance, tipper trucks need to reverse for long distances.)

RETARDER - The retarder on the G33CM has also been updated and improved and can now deliver 4700 Nm torque at a propeller shaft speed below 600 rpm.

PTO - With the Scania Opticruise gearbox, a new PTO programme with nine different performance steps is introduced. Higher torque and gear ratio improves the overall performance of bodywork equipment. Lower noise levels and reduced fuel consumption is the result of higher gear ratio, which allows lower engine speeds.

The new Scania Opticruise gearbox G33CM is available for all V8 engines up to 660 hp as well as the high-output 13-litre 500 and 540 hp engines.

Information about the gearbox for the 770 hp V8 can be found under Specification on the Our range pages.

Rear axle gears

Scania’s rear axle range offers a robust and weight optimised design with a wide variety of gears and ratios, so you can find the optimal solution for your operation. All gears are offered with differential locks.

Single driven

Tandem driven

Single driven

Tandem driven

Single driven single reduction

Our gears for single reduction have low complexity and high efficiency and can master gross vehicle and train weights up to 78 tonnes with a wide range of gear ratios from 2.35 up to 5.57.

Single driven hub reduction

The single driven hub reduction axles are offered for the operations where startability, ground clearance and high gross train weights are favourable. They manage gross vehicle and train weights up to 80 tonnes with gear ratios from 3.80 up to 7.18.

Tandem driven single reduction

Tandem driven single reduction is offered for operations where you require traction together with optimal fuel efficiency. The RB662 + R660 tandem gear masters gross vehicle and train weights up to 80 tonnes with gear ratios from 2.92 up to 4.88.

Tandem driven hub reduction

Our broad tandem driven hub reduction axles are robust and durable and offers great startability and ground clearance. It masters extremely high gross vehicles and train weights to up to 210 tonnes with gear ratios from 3.52 up to 7.63.

Axle configuration and chassis height

Front, rear, fixed and steered tag axles – Scania can match the requirements of any application. The V8 can be teamed with a wide range of chassis configurations with different heights.

Tractor

Rigid