Australia

Scania commissions Hybrid-Electric bus for demonstration drives

Scania Australia has commissioned a locally-built Hybrid-Electric city bus for demonstration duties in a bid to expose its real-world benefits to operators around the country.

The bus is similar in specification to that already in service with a number of operators in Victoria and South Australia. It offers fuel savings of between 25 and 35% as well as similar reductions in tailpipe emissions, plus benefits such as silent running mode for arrival and departures from bus stops.

 

“The Scania Hybrid-Electric city bus is a ‘here-and-now’ solution that can deliver solid, repeatable and reliable performance day-after-day,” says Scania Bus and Engines Sales Director, Julian Gurney.

 

“We have several years of in-service experience in Europe, as well as having these buses on the road in Australia for a meaningful period of time, clocking up thousands of commuter inner and outer suburban kilometres.

 

“In real world Australia testing we have seen the Hybrid-Electric city bus able to cruise on the highway at 100 km/h propelled only by the electric motor. The bus’s computer controls constantly monitor engine load and other system demands and under the right conditions, for example, under light load on a flat road, the Hybrid can switch to zero tailpipe emissions mode and drive at speeds up to 100 km/h, further extending the fuel savings. It is a unique experience to drive along on battery power alone at 100 km/h,” Julian says.

 

“Aside from the business case stacking up in terms of reduced fuel burn, driver feedback has been very encouraging, and passengers are enjoying a smoother ride. Patrons waiting at stops have a more pleasant experience, as the bus can arrive and depart under battery power so there is far less noise pollution and of course no tailpipe emissions when running on battery power,” he says.

 

The Scania Hybrid-Electric bus can travel on battery power alone up to 4 km and at speeds of up to 45 km/h on the flat, at a gross weight of 18-tonnes, before the combustion engine restarts to recharge the batteries. To recharge the battery pack from empty takes around 30 minutes of engine running, depending on conditions.

 

The Scania parallel Hybrid-Electric powertrain system comprises a 9.0-litre 5-cylinder Euro 6 compliant diesel engine producing 320 hp, and 1600 Nm of torque, which is able to run on regular diesel, biodiesel or HVO (Hydrogenated Vegetable Oils) allowing for a CO2 reduction of up to 92% (depending on the fuel used).

 

It is mated to a Scania electric motor that can deliver up to an additional 177 hp
(130 kW) and 1030 Nm of torque, and is integrated into the Scania Opticruise automated 12-speed transmission.

 

When running with the diesel engine assisted by the electric motor, the bus uses around 25% less diesel. Adding in the fully electric zero tailpipe modes, and the overall fuel saving climbs to between 30 and 35%, depending on driving styles and environments.

 

“We commissioned a Hybrid-Electric demonstrator so that we can show off the performance advantages of the bus operating in a variety of Australian climates. We’ll be showing off the bus operating in the southern climes all the way up the east coast to the Far North of Queensland,” Julian says.

 

“Our targets are operators who are keen to show they are taking meaningful steps towards reducing their carbon footprint, without having to install additional refuelling or recharging infrastructure at their depots.

“Operators keen to take their first step into a much greener transportation future may contact the Scania office in their capital city, or call us direct at Scania in Melbourne, and we will work to make the demonstrator bus available as soon as practicable,” Julian says.

 

“The green public transportation revolution has begun, and there are simple, feasible and cost-effective steps that can be taken today to reduce our bus fleets’ carbon footprints, tailpipe emissions and urban noise pollution.”

You can find out more about our Hybrid demonstration bus by contacting your local Scania bus account manager.

 

QLD

Brian Thompson                      0418 531 632

WA

Dean Cash                              0478 310 518

NSW

Logan Hoser                             0411 768 047

Shane Simpson                        0411 768 027

Ian Clarke                                 0438 482 492         

VIC / SA / TAS

Dean Cash                              0478 310 518

Jamie Atkinson                      0408 059 501