You seem to be located in .

Go to your Scania market site for more information.

Non-Re-Exportation to Russia and/or Belarus Clause

1 AUGUST 2024

1. Background

 

1.1 The European Union/EU have issued numerous sanctions regulations targeting Russia and Belarus, such as Council Regulations (EU) No 833/2014 of 31 July 2014 and (EC) 765/2006 of 18 May 2006, as amended inter alia through Council Regulations (EU) 2023/2878 of 18 December 2023 and (EU) 2024/1865 of 29 June 2024 respectively (hereinafter jointly referred to as the “Amending Regulations”).

 

1.2 All Scania-branded and other products supplied by SCANIA (MALAYSIA) SDN BHD (“Scania Malaysia”) under the quotation (hereinafter referred to as “Scania Products”) are ultimately sourced from Scania CV AB as incorporated in Sweden within the EU.

 

1.3 The Amending Regulation contains mandatory requirements for EU entities selling, supplying, transferring or exporting goods to certain countries (including the geographical scope of the quotation) to introduce contractual safeguards against re-exportation to Russia and/or Belarus as well as re-exportation for use of supplied products in Russia and/or Belarus. Scania CV AB therefore does not accept any such re-exportation.

 

1.4 In light of the above, the Customer acknowledges, accepts and agrees to all of the below provisions with regard to re-exportation safeguards and restrictions, rights of inquiry and audit, remedies and sanctions, and related matters around all and any Scania Products (here­inafter jointly referred to as the “No-Re-Exportation Clauses”).

 

2. Re-Exportation Safeguards and Restrictions

 

2.1 The Customer represents, warrants and undertakes that regardless of country of manufacture, export or other origin of Scania Products;

 

a) the Customer will not (whether directly or indirectly) re-export any Scania Product;

i) to Russia and/or Belarus, defined as the Scania Product being delivered in Russia and/or Belarus, or sold to a legal entity or an individual registered and/or located/residing in Russia and/or Belarus, or sold to a legal entity which is more than 50 % controlled by another legal entity or an individual registered and/or located/residing in Russia and/or Belarus; or

 

ii) for use in Russia and/or Belarus, defined as the Scania Product being registered in Russia and/or Belarus or used predominantly for domestic traffic in Russia and/or Belarus;

 

b) the Customer will include non-re-exportation restrictions corresponding to the No-Re-Exportation Clauses in all and any of its own agreements for transferring (if so permitted by quotation) a Scania Product to a subsequent buyer;

 

c) the Customer shall, if so required and requested at any time by Scania CV AB or Scania Malaysia in connection with quotation or specific orders for Scania Products thereunder, submit relevant end-user statements according to Scania CV AB-approved formats as confirming that no restricted re-exportation will occur;

 

d) the Customer shall immediately notify Scania Malaysia of any breaches and incidents occurring on the Customer’s side, and also of any conduct generally by any third party which could frustrate the purposes of the No-Re-Exportation Clauses.

                         

3. Inquiries and Audits

 

3.1 The Customer undertakes to fully comply without undue delay with any information requests made in writing by Scania Malaysia to inquire into measures taken by the Customer to fulfil all and any of its undertakings as set out in the No-Re-Exportation Clauses.

 

3.2 Scania Malaysia shall be entitled upon its own request and at its own cost to conduct audits on-site or off-site at any time and in any frequency of all and any facilities, systems and documentation of the Customer, as reasonably required or relevant for Scania Malaysia to verify the Customer’s fulfilment of all and any of its undertakings under the No-Re-Exportation Clauses.

 

3.3 On the Customer’s reasonable demand, inquiries and audits as above shall be handled through an independent auditor without a right of access for Scania Malaysia, if and only to the extent that information is manifestly, or is reasonably likely to be, proprietary to or trade secrets of the Customer.

 

3.4 The Customer undertakes to honor rights of audit and inquiry corresponding to the above also in favor of Scania CV AB, and acknowledges that a refusal to allow for Scania CV AB to fully exercise such rights shall be considered a breach of its undertakings to Scania Malaysia under this Clause 3. 

 

4. Remedies and Sanctions

 

4.1 The Customer acknowledges and accepts that all its undertakings of the No-Re-Exportation Clauses are essential elements of the contractual and business relationship between the Parties, and that consequently any breach of any one of such undertakings shall be considered material and subject to the below regime of remedies and sanctions.

 

4.2 In case of breach by the Customer of any of its undertakings of the No-Re-Exportation Clauses, save as set out separately below, and such breach has not been remedied by the Customer (where remediable) within fifteen (15) days of sending by Scania Malaysia of a written request to that effect, Scania Malaysia may with immediate effect and by written notice to the Customer take and/or deploy all, either or any combination of the following remedial actions and sanctions.

 

a) Termination of quotation.

 

b) Cancelling of any confirmed and outstanding orders, regardless of whether or not the Scania Products covered by such orders are subject to re-exportation risks in conflict with the purposes the No-Re-Exportation Clauses.

 

c) Waiving of any outstanding or ensuing obligations (such as, but not limited to for warranty coverage) under fulfilled order(s) for any Scania Product that has been re-exported in conflict with the No-Re-Exportation Clauses or which remains unaccounted for as according to the above (all such vehicles hereinafter collectively referred to as “Sanctionable Products”).

 

d) Limiting of aftermarket and campaign support for all Sanctionable Products.

 

e) Claiming for each breach the payment of a penalty, not to be counted against any damages claimed as below, in an amount determined by Scania Malaysia up to the higher of i) the aggregated purchase price paid or payable by the Customer to Scania Malaysia for all Sanctionable Products, ii) twenty (20) % of the aggregated value of all orders for all and any Scania Products as confirmed by Scania Malaysia to the Customer during the last twelve (12) months, and iii) five hundred and twenty thousand (520,000) MYR.

 

f) Claiming of compensation and indemnities from the Customer, over and above any penalties claimed as above, so as to hold Scania Malaysia harmless of all and any costs and damages incurred as a result of the Customer’s breach, non-accountability of any Sanctionable Products, or other measure(s) taken or not taken and as warranting Scania Malaysia to terminate.

 

4.3 If for any specific order (whether confirmed or not, and regardless of what lead-time remains to the applicable or intended delivery date) Scania Malaysia has requested that an end-user statement be obtained and presented to Scania Malaysia as set out in Clause 2.1(b) above, and Scania Malaysia has not received such a statement within such reasonable respite as has been set out in the written request, Scania Malaysia shall not be liable to fulfil its delivery obligations with regard to the Scania Products covered by such order until the end-user statement has successfully been submitted to Scania Malaysia. In case this still has not happened within fifteen (15) days from the date of sending of the request, Scania Malaysia shall also be entitled to immediately take all, either or any combination of the following actions.

 

a)   Refusal to confirm new orders, regardless of whether or not they were subject to the relevant end-user statement request by Scania Malaysia.

 

b)   Cancellation by written notice to the Customer of the order(s) for which the relevant end-user statements were requested.

 

c)   Cancellation, whether in connection with a main order cancellation as under (b) above or at any time thereafter, any other order for Scania Products which is still outstanding with the Customer.

 

d)   Claiming of compensation and indemnities from the Customer to hold Scania Malaysia harmless of all and any costs and damages incurred as a result of any order cancellation(s) as above.

 

4.4 In case Scania Products that were delivered to the Customer have then been re-exported in conflict with the purposes of the No-Re-Exportation Clauses by any third party, notwithstanding that all of the Customer undertakings as set out therein have been fulfilled, Scania Malaysia may with immediate effect and by written notice to the Customer take and/or deploy all, either or any combination of the following remedial actions and sanctions.

 

a)   Termination of quotation.

 

b)   Cancelling of any confirmed and outstanding orders, regardless of whether or not the Scania Products covered by such orders are subject to re-exportation risks in conflict with the purposes of the No-Re-Exportation Clauses.

 

c)   Waiving of any outstanding or ensuing obligations (such as, but not limited to for warranty coverage) under fulfilled order(s) for all Sanctionable Products.

 

d)   Limiting of aftermarket and campaign support for all Sanctionable Products.

 

4.5 In case there is persistent uncertainty as to the location of any Scania Products delivered to or through the Scania Malaysia (such as due to non-activation in Scania systems of a warranty start date, or non-connectivity for positioning), and the Customer has not reliably accounted for such Scania Products within fifteen (15) days of sending by Scania Malaysia of a written request for explanations, Clause 4.4 shall apply correspondingly with a right for Scania Malaysia to consider such Scania Products that remain unaccounted for as Sanctionable Products.

 

4.6 The Customer acknowledges that due to Scania CV AB having to comply with continued changes to EU sanctions regulations, such as the Amending Regulation, the No-Re-Exportation Clauses may have to be re-negotiated from time to time, and that therefore, in any scenario in which any additional amendment(s) as may be required for such Scania CV AB compliance cannot be agreed with the Customer, Scania Malaysia may with immediate effect and by written notice to the Customer terminate quotation and cancel any confirmed and outstanding orders.

 

5. Notices

 

5.1 Notwithstanding anything set out to the contrary in quotation, any notice to be sent by Scania Malaysia in writing according to the No-Re-Exportation Clauses shall be considered duly served if sent by regular mail or e-mail to the Customer’s managing director or CFO using the latest of any contact details as the Customer has communicated to Scania Malaysia, or in any event by regular mail to the Customer’s formally registered address at the time of sending of the notice.

 

6. Miscellaneous

 

6.1 Changes to the No-Re-Exportation Clauses may be communicated by Scania Malaysia in writing to the Customer, and shall become binding on the Customer if no objections to the communicated changes have been received by Scania Malaysia in writing within fifteen (15) days of sending of the communication.

 

6.2 In case of contradictory content between the No-Re-Exportation Clauses and quotation, those of the No-Re-Exportation Clauses shall prevail.

 

-End of Text-