R-day low
The lower roof allows for transport of overhead loads
R-day normal
A day cab with resting equipment for shorter trips
R-sleeper low
A sleeper cab with lower roof that allows for transport of overhead loads
R-Sleeper Normal cab
A compact sleeper cab for shorter trips
R-sleeper Highline
Gives you more space, comfort and storage for longer trips away from home.
Power your profitability
Scania has the broadest range of powertrains on the market. Now it’s even broader with the addition of the performance stage 540 hp. We have in fact updated the whole range of 9 & 13-litres Euro 6 engines giving a fuel saving of up to 2% fuel.
9-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
9-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
9-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
13-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16-litre
Output | Torque | Fuel | Emission technology | Engine PTO |
---|---|---|---|---|
|
|
|
|
|
The virtue of this gearbox lies in its simplicity. Rugged and compact, there are no crawler ratios and the smooth, positive action makes gearchanging easy. Options include Scania Opticruise, Scania Retarder and a selection of power take-offs.
This gearbox offers similar advantages, together with an extra crawler ratio. Based on a 4-speed box, plus a planetary section, its strength is more than a match for the high-torque output of any Scania inline engine. Options include Scania Retarder and a selection of power take-offs.
This gearbox is built to tackle the most challenging terrain, making it the perfect choice for demanding long-haulage. Its closely stepped ratios combine light weight with ease of driving with exceptional operating economy.
For applications that demand extra low-speed pulling power, this gearbox has two extra crawler ratios. Designed for optimised economy, it has proved highly successful for both long-distance and regional distribution, as well as heavy construction applications. The overdrive versions offer higher torque capacity, plus overdrive for low and economic cruising revs. Scania Opticruise and Scania Retarder, as well as a selection of power take-offs, are available for all range-splitter gearboxes.
Scania’s new Opticruise G33CM gearbox, available for the high-output 13-litre 500 and 540 hp engines, features improved and speedy gearshifting in combination with better fuel consumption and excellent comfort.
After six years of development and testing, we are introducing a gearbox with plenty of new technologies, such as variable oil volume, improved gear lubrication by oil spray function and a wider gear spread.
Thanks to significantly reduced internal losses, and thereby improved energy efficiency, the G33CM itself offers fuel savings of one percent. The weight has been reduced by 60 kg to be used for increased payload. Additionally, it provides higher uptime with an oil change interval of up to one million km. All this to ensure that your total operating economy is optimised.


DRIVEABILITY - Better driveability is achieved with a wider gear ratio spread, which includes super crawler and overdrive, that match Scania’s low rev engine philosophy.

REVERSING - Instead of a reversing gear, a planetary gear is used for reversing. This solution enables having eight gears for going in reverse at speeds up to 30 km/h. (This is useful when, for instance, tipper trucks need to reverse for long distances.)

RETARDER - The retarder on the G33CM has also been updated and improved and can now deliver 4700 Nm torque at a propeller shaft speed below 600 rpm.

PTO - With the Scania Opticruise gearbox, a new PTO programme with nine different performance steps is introduced. Higher torque and gear ratio improves the overall performance of bodywork equipment. Lower noise levels and reduced fuel consumption is the result of higher gear ratio, which allows lower engine speeds.
The new Scania Opticruise gearbox G33CM is available for all V8 engines up to 660 hp as well as the high-output 13-litre 500 and 540 hp engines.
Rear axle gears
Scania’s rear axle range offers a robust and weight optimised design with a wide variety of gears and ratios, so you can find the optimal solution for your operation. All gears are offered with differential locks.
Single driven single reduction
Our gears for single reduction have low complexity and high efficiency and can master gross vehicle and train weights up to 78 tonnes with a wide range of gear ratios from 2.35 up to 5.57.
Single driven hub reduction
The single driven hub reduction axles are offered for the operations where startability, ground clearance and high gross train weights are favourable. They manage gross vehicle and train weights up to 80 tonnes with gear ratios from 3.80 up to 7.18.
Tandem driven single reduction
Tandem driven single reduction is offered for operations where you require traction together with optimal fuel efficiency. The RB662 + R660 tandem gear masters gross vehicle and train weights up to 80 tonnes with gear ratios from 2.92 up to 4.88.
Tandem driven hub reduction
Our broad tandem driven hub reduction axles are robust and durable and offers great startability and ground clearance. It masters extremely high gross vehicles and train weights to up to 210 tonnes with gear ratios from 3.52 up to 7.63.
Axle configuration and chassis height
Front, rear, fixed and steered tag axles – Scania can match the requirements of any application. The R-series can be teamed with a wide range of chassis configurations with different heights.
![]()
4x2
Chassis height:
Extra low, low, normal, high
|
![]()
4x4
Chassis height:
High
|
![]()
6x2
Chassis height:
Normal
|
![]()
6x2/2
Chassis height:
Normal
6x2 pusher |
![]()
6x2/4
Chassis height:
Normal, low
6x2 twin-steer |
![]()
6x4
Chassis height:
Normal, high
|
![]()
6x6
Chassis height:
High
|
|
|
![]()
4x2
Chassis height:
Low, normal, high
|
![]()
4x4
Chassis height:
High
|
![]()
6x2
Chassis height:
Low, normal
|
![]()
6x2/2
Chassis height:
Normal
6x2 pusher |
![]()
6x2/4
Chassis height:
Normal
6x2 twin-steer |
![]()
6x2*4
Chassis height:
Low, normal
|
![]()
6x4
Chassis height:
Normal, high
|
![]()
6x6
Chassis height:
High
|
![]()
8x2
Chassis height:
Normal
|
![]()
8x2*6
Chassis height:
Low, normal
8x2 rear-steer |
![]()
8x2/4
Chassis height:
Normal
8x2 twin-steer |
![]()
8x4
Chassis height:
Normal, high
|
![]()
8x4*4
Chassis height:
Normal
8x4 rear-stear |
![]()
10x4*6
Chassis height:
Normal
10x4 rear-steer |
|