You seem to be located in .

Go to your Scania market site for more information.

Scania offers a flying start for sustainable airports

8 OCTOBER 2019

In an era when the travel industry is putting a sharper focus on sustainability, Scania will be at inter airport Europe in Munich with a selection of vehicles, engines and solutions that bring sustainable technology to ramps and runways. Airport operators can turn to solutions based on alternative fuels and hybrids from Scania’s modular range in order to reduce their carbon footprint. 

inter airport europe

  • At inter airport Europe, Scania will show the industry’s broadest offer of here and now solutions for sustainable propulsion on ramps and runways.
  • Scania’s hybrids could make a perfect match for catering trucks
  • DC16 315 – our new 710 hp V8 engine – meets Euro 6 and Stage V emission standards, and is ideal for Fire and Rescue vehicles
  • Four customised vehicles on display, each of them at the forefront of their respective application

“Catering trucks and crash tenders may have low annual mileage, but they can still make vital contributions towards making airports more sustainable through using alternative fuels,” says Alexander Vlaskamp, Senior Vice President, Head of Scania Trucks. “Every contri¬bution is important and we see a rapidly growing awareness in this area from our customers when configu¬rating their new solutions.”

 

Scania is also offering industrial engines that fulfil the latest Stage V emission requirements, while also providing excellent fuel efficiency. The latest addition, DC16 315, is a V8 that produces 710 hp and meets both Euro 6 and Stage 5 emission standards. All of Scania’s industrial engines are based on Scania’s industry-leading truck engines, thus offering the same level of robustness and availability, as well as the opportunity to use Scania’s worldwide parts and service network.

 

Major airports depend on an array of different service and support vehicles in their operations. That is why Scania solutions based on alternatives such as bio¬ethanol, biogas, biodiesel or hybrids will make a difference, despite the fact that each individual vehicle may have relatively low annual mileage or operating hours.

 

“Closed area operations such as major airports are actually ideal for electrification through our hybrids,” says Vlaskamp.

 

“For instance, catering trucks go back and forth but travel quite limited distances and can find time for charging between missions. And if they run out of electric power, they can always rely on HVO for their internal combustion engine and still operate with a CO2 reduction of up to 90%.”

 

Scania is the only OEM that offers trucks, buses, chassis and engines that in¬clude a full range of alternative solutions for propulsion and powering. This means that everything from rescue vehicles, passenger transport, catering and supply trucks or various types of maintenance vehicles, including snow blowers, can operate with a reduced carbon footprint and also excellent total operating economy.

Solutions that meets the challenges

“I believe that Scania’s line-up is unique,” says Vlaskamp. “Engaging in a partnership with us means access to an almost endless palette of solutions, due to our modular system and Scania’s dedication to supporting a shift towards low carbon operations.”

 

Here are some of the solutions Scania and its partners are showing at the fair:

FIRE AND RESCUE

  • P 370 CP28 4×2
  • Engine: DC13 149, Euro 6, 370 hp, 1,900 Nm, for diesel or HVO
  • Wheel base: 4,550 mm
  • Water tank capacity: 3,000 liters
  • Foam tank capacity: 200+100 liters
  • Length: 8,340 mm
  • Height: 2,008 mm
  • Width: 2,600 mm
  • GVW: 19,000 kg
  • Body manufacturer: Floby Rescue AB

AIRPORT CRASH TENDER

  • P 500 CP20 L 6×6
  • Engine: DC13 155, Euro 6, 500 hp, 2,550 Nm, for diesel or HVO
  • Wheel base: 4,300 mm
  • Water tank capacity: 10,000 liters
  • Foam tank capacity: 1,000 liters
  • Length: 9,800 mm
  • Height: 3,900 mm
  • Width: 2,550 mm
  • GVW: 29,000 kg
  • Body manufacturer: Oskhosh Airport Products

CATERING TRUCK

  • L 280, CL 20L low entry, 4×2
  • DC09 133 Euro 6, 280 hp, 1,400 Nm, for diesel or HVO
  • Wheel base: 5,350 mm
  • Platform type: 2 ways
  • Working height: 2,740 to 6,000 mm
  • Length: 7,500 mm
  • Height: 3,800 mm
  • Width: 2,550 mm
  • GVW: 18,600 kg
  • Body manufacturer: Tecnove

Scania DC16 315

  • Configuration: V8
  • Displacement: 16.4 liters
  • Output range: 710 hp/529 kW/h
  • Meets Euro 6 and Stage V emission levels.

For further information, please contact:

Örjan Åslund, Head of Product Affairs, Scania Trucks

Telephone: +46 70 289 83 78, email: orjan.aslund@scania.com

Tommy Johnson, Product Manager, Industrial, Scania Engines

Telephone: + 46 70 628 21 38, email: tommy.johnson@scania.com